Aqueous Based

BCI Chemical Corporation Sdn. Bhd. provides a range of aqueous based drilling fluid additives. Range of products from commodities such as pH buffers and weighting agent  to specialty proprietary are available.

BCI team will work with customers to develop, blend, stock-up and source the aqueous based drilling fluids additives, to help customers better planning in the execution locally. Please engage the BCI technical team to develop specific products that can fullfil your requirements.  

  • Product
  • Description
  • Adi®CIDE

    A glutaraldehyde-based anti-microbial agent

  • Adi®THPS

     A non-oxidizing tetrakish-hydrozylmethyl phosphonium sulphate (THPS) based biocide

  • test

    test

  • Product
  • Description
  • Citric Acid

    Citric Acid is a mild organic acid that can be used to reduce pH, precipitate calcium when drill through cement.

  • Sodium Bicarbonate

    Sodium bicarbonate is use to precipitate calcium and control the pH. It is very effective in treating the cement contamination.

  • Soda Ash

    Soda ash or sodium carbonate is effective in precipitate calcium ions in aqueous-based drilling fluids and makeup water. It is also use to increase pH and flocculate the muds.

  • Product
  • Description
  • Adi®COR G100

    A corrosion inhibitor that effectively protect the corrosion in the gas pipeline.

  • Adi®COR W100

    An amine-type corrosion inhibitor that compatible with brine solution in saturated salt drilling fluids. It helps to protect the casing, and downhole tools from general corrosion

  • Adi®COR OAD

    A water-dispersible blended amine used to inhibit corrosion in dispersed aqua-base drilling fluids. It can be blend with solvent during the application, prior to drilling with aqua-base drilling fluids.

  • Product
  • Description
  • Adi®DEFOAM SP20

     A blend of alkoxylated fatty alcohol based defoamer. It is biodegradable and environment friendly. It effectively prevent and break out the foam that form in water base drilling fluids 

  • Adi®DEFOAM SP30

    A blend of long chain fatty alcohol based defoamer. It effectively prevent and break out the foam that form in water base drilling fluids.

  • Adi®DEFOAM EG10

     A premium grade, high molecular weight alcohol defoamer specifically developed to reduce foaming generated by high molecular polysaccharide. It is an effective foam breaker and can tolerates to high salt content. 

  • Adi®DEFOAM FA10

    Adi®DEFOAM FA10 is a high molecular weight alcohol defoamer specifically developed to reduce foaming generated by high molecular polysaccharide. 

  • Product
  • Description
  • Adi®Bentonite

    Adi®BENTONITE is a sodium montmorillonte bentonite which meets the API specification 13A, Section 4. Adi®BENTONITE has a high sodium-ion exchange capacity and is primarily used as a viscosifier and fluid loss reducer agents in fresh and salt water muds.

  • Adi®CMC-LV

    Adi®CMC LV is low viscosity sodium carboxymethyl cellulose which meets and exceeds OCMA DFCP 2 and API 13A Section 9 specifications

  • Adi®CMC-HV

    Adi®CMC-HV is a high viscosity, high molecular weight sodium carboxymethylcellulose designed to provide viscosity and reduce API filtration rate to water based drilling fluids.

  • Adi®CMC-EHV

    Adi®CMC-EHV is an extremely high viscosity technical grade sodium carboxyl methyl Cellulose of high molecular weight. Adi®CMC-EHV is a viscosifier and fluid loss reducer for water based mud and stable up to 300 0F.

  • Adi®GUAR

    Adi®GUAR extracted from the endosperm of guar seed (Cyamopsis tetragonoloba). It is a fine, white to cream coloured powder with no chemical additives. It has a low microbiological profile as the raw materials are processed under controlled and hygiene conditions.

  • Adi®HEC-EHV

     A nonionic high molecular-weight hydroxythylcellulose polymer. 

  • Adi® LAM-FR

    Modified starch Adi®LAM-FR is a low viscous fluid loss reducer

  • Adi® LAM-HT140

    Adi®LAM-HT140 is a modified nonionic polymer

  • Adi®PAC-RV (P)

    Adi®PAC-RV(P) is a purified high molecular weight polyanionic cellulose polymer which provides filtration control and viscosity to water base drilling fluids. Adi®PAC-RV(P) is a highly effective fluid loss reducer and secondary shale inhibitor. Adi®PAC-RV(P) combines both filtration and viscosity properties on an equivalent basis with high performance. Adi®PAC-RV(P) is readily dispersible in all water based drilling fluids.

  • Adi®PAC-RV (T)

    Adi®PAC-RV(T) is a technical grade high molecular weight polyanionic cellulose polymer. Adi®PAC-RV(T) is a highly effective fluid loss reducer and secondary shale inhibitor. Adi®PAC-RV(T) combines both filtration and viscosity properties on an equivalents basis with high performance. Adi®PAC-RV(T) is readily dispersible in all water based drilling fluids.

  • Adi®PAC-LV (P)

    Adi®PAC-LV(P) is a purified high molecular weight polyanionic cellulose polymer. Adi®PAC-LV(P) is a highly effective fluid loss reducer and secondary shale inhibitor. Adi®PAC-LV(P) is readily dispersible in water based mud systems containing mono and bivalent cations and will not cause adverse viscosity increases.

  • Adi®PAC-LV (T)

    Adi®PAC-LV(T) is a technical grade low molecular weight polyanionic cellulose polymer which provides filtration control to water base drilling fluids. Adi®PAC-LV(T) is used as a fluid loss reducer and also acts as a shale inhibitor. Adi®PAC-LV(T) readily dispersible in water based mud systems containing mono and bivalent cations. Adi®PAC-LV(T) will not cause undue viscosity increases.

  • Adi®PAC-XLV

    Adi®PAC-XLV is an extra low molecular weight polyanionic cellulose polymer which provides filtration control to water based drilling fluids. Adi®PAC-XLV is a highly effective fluid loss reducer and secondary shale inhibitor. Adi®PAC-XLV is a high performance product readily dispersible in water based mud systems from fresh to salt saturated and especially in weighted mud.

  • Adi®HEC-L

    A  Hydroxyethyl Cellulose polymer that suspended in synthetic non-aqueous fluids. 

  • Adi®ZAN-L

    A high-purity xanthan gum biopolymer, suspended in non-aqueous fluids. 

  • Adi®ZAN-XC

     

    A  high molecular weight polysaccharide biopolymer designed specially to viscosify water base drilling, completion and workover fluids. It’s soluble in all water systems from freshwater, seawater, salt and heavy brine systems.
     
  • Adi®ZAN-XCD

     A liquid dispersible and high molecular weight xanthan biopolymer

  • Adi®BEN-EX
  • Product
  • Description
  • Adi®CARB (CALCIUM CARBONATE, CaCO3)           

    A high-purity ground limestone, use in increasing weight or density as well as reduce fluid loss in drilling and workover fluids. It also can control seepage and loss of circulation while drilling or completing and is easily removed.

     
    Adi®CARB is available in different micron sizes such as 5, 25, 50, 150, 1000 2000, fine, medium and coarse grade.
  • Adi®PLUG GN 400

     A ground walnut that has D50 of 400mm. It can be used in oil muds and it is not deformable so hydrostatic pressures will not affect bridging effectiveness.

  • Adi®PLUG

    A ground walnut which is used to prevent seepage losses. It can be used in oil muds and it is not deformable so hydrostatic pressures will not affect bridging effectiveness. Adi®PLUG is available in three (3) standard grind sizes which are Fine (F), Medium (M) and Coarse (C) 

  • Product
  • Description
  • Adi®LUBE

    A highly effective, biodegradable and environmentally friendly ester based lubricant for water based drilling fluids

  • Product
  • Description
  • Caustic Soda

    Caustic Soda or sodium hydroxide is use to increase the alkalinity of the aqua-based drilling fluids.

  • Lime

    Lime or calcium oxide is a pH modulator for calcium based drilling fluids. 

  • Hydrated lime

    Hydrated Lime or calcium hydroxide is a pH modulator. It provides pH>12.5 with 1% in solution.

  • Citric Acid

    Citric Acid is a mild organic acid that can be used to reduce pH, precipitate calcium when drill through cement.

  • Soda Ash

    Soda ash or sodium carbonate is effective in precipitate calcium ions in aqueous-based drilling fluids and makeup water. It is also use to increase pH and flocculate the muds.

  • Sodium Bicarbonate

    Sodium bicarbonate is use to precipitate calcium and control the pH. It is very effective in treating the cement contamination.

  • Product
  • Description
  • Adi®OS

    An Ammonium Bisulphite Solution with ≥65% active.

  • Adi®H2S

    A triazine base hydrogen disulfide

  • Product
  • Description
  • Adi®CAP

    "Adi®CAP is a specially treated high molecular weight Partially Hydrolyzed Polyacrylamide polymer for all water-based drilling fluids. It functions as viscosifying agent, shale and bore-hole stabilizer, encapsulator, bentonite extender, flocculation agent and assist with fluid loss control. There are different grades of AdiTMCAP available, each with different molecular weight range. "

  • Adi®CAP L

    A liquid dispersible, high molecular weight Partially Hydrolyzed Polyacrylamide polymer.

  • Product
  • Description
  • Adi®CFL 500

     A chrome free Lignosulphonate, it deflocculate, maintaining viscosity, and reducing fluid loss in  aqua‐base mud systems. 

  • Product
  • Description
  • Adi®FluoG

     A fluorescence dye tracer additive to provide maximum contrast with formation waters. 

  • Product
  • Description
  • Adi®BAR (Barium Sulphate, BaSO4)

    An API grade barite, SG4.10~4.20

  • Adi®CARB (Sized Calcium carbonates, CaCO3)

    An acid-soluble weighting agent with the  specific gravity of of 2.7 to 2.8. It can be used to formulate drilling fluids with SG upto 14 ppg [1.7 sg].

  • Hematite

    Fine iron-core (Fe2O3) powder with minimum SG of 5.1